Home » mavericks

Tagged mavericks

Encrypt any disk in Mavericks

Hi Remoters,

¿Do you have important data in your Macbook? Are you afraid that someone or somehow somebody can extract that information from your compurte? I will show you a quick solution to all that.

One of the more interesting—and less visible—new features in Mavericks the ability to encrypt almost any disk. OS X has long offered the ability to encrypt your startup disk using Apple’s FileVault, but Mavericks extends this feature to other disks, even to simple USB flash drives. Here is an overview of how this feature works, how you can encrypt and decrypt a disk, and what options you have when doing so.

 

Encrypt a disk from the Finder

This new full-disk encryption feature is well hidden in Mavericks. Typically, you use Apple’s Disk Utility (in /Applications/Utilities) to work with hard disks or other types of removable media. Disk Utility can erase, partition, and repair hard disks, but curiously, it cannot encrypt a hard disk.

Control-click to encrypt To encrypt a disk, instead right- or Control-click on a hard disk’s icon on the Desktop, or in a Finder window sidebar. Choose Encrypt Disk Name and enter a password. You’ll have to enter the password a second time, and you won’t be able to go any further unless you also enter a password hint. You need to choose a good, secure password, but it shouldn’t be something too complicated.

You’ll most likely use the encryption feature for a portable disk you carry around with you. When you connect the disk to your Mac, or to someone else’s Mac, you’ll need to remember the password to access the files. When you use the disk with your Mac, or, say, a Mac at work, you can store the password in the keychain.

Expect a wait After you’ve entered your password, and clicked on Encrypt Disk, you’ll have to wait. Depending on how big your disk is, your wait could be a few minutes or several hours. In my tests, I found even a 1GB flash drive took several minutes to encrypt. Unfortunately, there is no progress bar, so you have no way of knowing how long this process will take. The only way to be sure something is happening is if the disc has an LED that flashes as it is being read or written to. For this reason, if you are encrypting a large hard disk, you may want to let the process go overnight.

When the disk is finished encrypting (the blinking light on your drive will be your clue), eject it as you would any other disk. When you next connect it to your Mac, a dialogue box will display asking you to enter your password. You can select Remember This Password In My Keychain if you wish to use this disk often and don’t want to have to enter the password every time. If you forget the password, click on Show Hint to see the hint that you recorded. Click on Unlock to allow OS X to decrypt the disk.

Don’t lose your password Copy files to and from this disk, and they will be encrypted or decrypted on the fly. This feature uses uses full disk, XTS-AES 128 encryption, which is secure enough for most uses. But I cannot stress enough that if you lose this password, you will not have access to any of the files on the disk. Period. Unlike FileVault, which presents you with a “recovery key” that you can use if you’ve lost your password, there is no safety net here.

If you ever want to turn off encryption, right- or Control-click on the disk and choose Decrypt Disk Name. Enter your password, then click on Turn Off Encryption. As with the encryption process, there is no progress bar or other feedback.

While you can turn on or off encryption while your disk contains files, there is always the chance that something may go wrong. It’s best to make sure you have a copy of those files before encrypting or decrypting.

Use disk encryption from the command line

Can you encrypt your disks from the command line? Of course you can. If you’re not the geeky type, you may not want to read any further. But if you do know how to wield Terminal commands and want more feedback about the encryption process, the following will certainly interest you.

Prepare a disk by converting You encrypt disks with the diskutil command, but first, you have to convert them to a format called CoreStorage.

Start by running this command:

diskutil list

This returns a list of all the disks connected to your Mac. For example, on my Mac, I see this:

diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme               *251.0 GB   disk0
   1:                        EFI                209.7 MB   disk0s1
   2:                  Apple_HFS Mac OS X       250.1 GB   disk0s2
   3:                 Apple_Boot Recovery HD    650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME           SIZE       IDENTIFIER
   0:      GUID_partition_scheme               *2.0 TB     disk1
   1:                        EFI                209.7 MB   disk1s1
   2:                  Apple_HFS Music Ext      2.0 TB     disk1s2
/dev/disk2
   #:                       TYPE NAME           SIZE       IDENTIFIER
   0:      GUID_partition_scheme               *2.0 TB     disk2
   1:                        EFI                209.7 MB   disk2s1
   2:                  Apple_HFS Boot Backup    150.0 GB   disk2s2
   3:                  Apple_HFS Backup         1.6 TB     disk2s3
   4:                  Apple_HFS TM Backup      249.4 GB   disk2s4
/dev/disk3
   #:                       TYPE NAME           SIZE       IDENTIFIER
   0:      GUID_partition_scheme               *750.2 GB   disk3
   1:                        EFI                209.7 MB   disk3s1
   2:                  Apple_HFS Music          749.8 GB   disk3s2
/dev/disk4
   #:                       TYPE NAME           SIZE       IDENTIFIER
   0:      GUID_partition_scheme               *1.0 GB     disk4
   1:                  Apple_HFS Untitled       1.0 GB     disk4s1

The disk I want to encrypt is the last one, called Untitled. To the right of its name, you can see its identifier, disk4s1. With that information, I can convert the disk to the CoreStorage format with the following command:

sudo diskutil corestorage convert disk4s1

Terminal will request your administrator’s password, then will begin the conversion process. Note that you’ll even see a progress bar on the last line in Terminal, as below.

Started CoreStorage operation on disk4s1 Untitled $Resizing disk to fit Core Storage headers $[ | 0%..10%.............................................. ]

When this process has completed, you’ll be shown information about the disk in Terminal:

$Creating Core Storage Logical Volume Group
$Attempting to unmount disk4s1
$Switching disk4s1 to Core Storage
$Waiting for Logical Volume to appear
$Mounting Logical Volume
$Core Storage LVG UUID: C33BF3C6-B808-4BE4-8D18-02DBC0151667
$Core Storage PV UUID: 9D312FD5-33F1-4A53-8F49-1C64010710D1
$Core Storage LV UUID: 2D74D3DA-95DF-4652-A48C-CDC86898B5EF
$Core Storage disk: disk5
$Finished CoreStorage operation on disk4s1 Untitled

Encrypt the disk The important information above is the LV UUID, or logical volume universally unique identifier. Using that information, you can then run the command to encrypt the disk, as follows:

sudo diskutil corestorage encryptvolume 2D74D3DA-95DF-4652-A48C-CDC86898B5EF -passphrase password

Replace password with your password. And make sure you don’t forget it!

You’ll see the following when the process is finished; as above, with the method of encrypting a disk from the Finder, this may take a while:

Started CoreStorage operation on disk5 Untitled
$Scheduling encryption of Core Storage Logical Volume
$Core Storage LV UUID: 2D74D3DA-95DF-4652-A48C-CDC86898B5EF
$Finished CoreStorage operation on disk5 Untitled

At this point, your disk is now encrypted. You can eject it from the Finder (or, if you want to stay in Terminal, you can eject it with this command: diskutil eject Untitled), and use it as described above. The next time you connect it to a Mac, you’ll be asked for the password.

Decrypt the disk Decrypting a disk from the command line is pretty simple. Here’s the command you can use, with the LV UUID we saw above. Replace password with your password.

diskutil cs decryptvolume 2D74D3DA-95DF-4652-A48C-CDC86898B5EF -passphrase password

For most users, encrypting volumes in the Finder is simplest option, but power users may enjoy the feedback and control they get with the command line. Either way, Mavericks new encryption feature is a great way to secure portable disks to carry sensitive files.
Thanks for following,

Contact us: support@itremotesolutions.com

Repair Aperture Library

Hi Remoters,

Today I want to show you how to fix your Aperture Library, I need to fix mine a couple of times…so here you have it.

To repair or rebuild your Aperture library
Close Aperture, if it’s open.
Locate the Aperture library you want to fix, then hold down the Command and Option keys while double-clicking the Aperture library.
The Aperture Library First Aid dialog appears.

Figure. Controls in the Aperture Library First Aid dialog.

Figure. Controls in the Aperture Library First Aid dialog.
In the Aperture Library First Aid dialog, do one of the following:
To repair the permissions of the files within your Aperture library: Select Repairing Permissions.
This option should be used when Aperture can’t access some of the image files within the database or Aperture is unable to open the library itself. The Repairing Permissions option reviews each file in your Aperture library and sets the read and write access of each file where appropriate, allowing Aperture to access the files again.

Note: This option does not relocate referenced images whose master image files are offline. For more information about reconnecting offline images, see Reconnecting Missing or Offline Referenced Images.

To repair your Aperture library file: Select Repair Database.
This is the first option you should use if you believe there is something wrong with the Aperture library other than image file access issues.

To rebuild your database from scratch: Click Rebuild Database.
This option should be used as your last measure as it can be time-consuming for large image libraries. If you have tried repairing your database, and the issues you are encountering with your Aperture library still persist, you should use the Rebuild Database option. Aperture examines the library’s entire database and rebuilds each component until it reconstitutes your original Aperture library.

Depending on your selection, click Repair or Rebuild.
Aperture either fixes file permissions within the library or repairs or rebuilds the library, and then opens the application workspace.

And here you have a short youtube video.

Thanks for following,

Configure Email iOS device

Hi remoters.

Here you have a small How to configure your email in an iOS device

    • 1 From the home screen of your iPhone, tap the “Settings” icon.
    • 2 Select “Mail, Contacts, Calendar,” which is in the third cluster of options on the “Settings” menu.
    • 3 From the “Accounts” section, tap “Add Account.”
    • 4 Select “Other” from the bottom of the “Add Account” menu.
    • 5 Tap on “Add Mail Account.”
    • 6 Enter your name, Hotmail email address, and the password you use to access your Hotmail account. Save the information by tapping the “Save” icon in the upper right corner of the scree

outlook_logo

Thanks for following,

Contact us: support@itremotesolutions.com

Check CPU Speed Macbook

Hi Remoters,

Here you have a small How to check your CPU speed on a Mac.

1. Hit the Command+Space bar to open the Spotlight search field.

2014-02-27_21-59-02

2. Type in “Activity Monitor” and press the return key.

2014-02-27_21-57-26

3. Look at the bottom of the “Activity Monitor” screen. Click on the tab that says “CPU.” Information about the central processing unit will appear.

Thanks for following,

Contact us: support@itremotesolutions.com